The hardness status, water absorbency and strength of the surface to be applied should be checked in advance. The application surface should be cleaned of negative effects (such as dust, dirt, debris, oil) that will prevent adhesion. Gaps on the surface and places where repairs should be made should be repaired with Aragonit Repair Mortar products that are suitable in advance. In order to increase adhesion on the gross concrete surfaces to be applied, and to prevent absorbency on surfaces with high absorbency, the surface should be primed with Aragonit Beto DC 200 Primer. Aragonit Lastexin 2K (A) and (B) component is mixed with a low-speed mixer so that it does not remain lumpy. After waiting for the ripening time of 3-5 minutes, the mortar is ready for use, which is mixed again for 1-2 minutes. The application should be carried out by applying at least 2 layers to the surface with the help of a suitable brush or roller. After the first layer has dried, the second layer should be applied vertically to the first layer. It is recommended to apply it with a mesh to corners and building joints. After application, rectifying can be done with a soft damp sponge.
•It is recommended to be done after 7 days (minimum) to fill pool and water tanks
•Water impermeable time minimum 7 days.
•Mechanical strength gain time minimum 2 days.
•Depending on the air temperature, ceramic-tiles can be laid after 48 hours.
•After application, application tools should be washed with plenty of water.
•The material in the container, which is hardened and has completed its setting , cannot be used.
PERFORMANCE :
It complies with TS EN 14891 (CMP) , EN 1504-2 Standards.
Initial tensile adhesion force: ≥ 0,5 N/mm²
Tensile adhesion force after contact with water: ≥ 0,5 N/mm²
Tensile adhesion force after heat aging process: ≥ 0,5 N/mm²
Tensile adhesion force after freeze dissolution cycle: ≥ 0,5 N/mm²
Tensile adhesion force after contact with lime water: ≥ 0,5 N/mm²
Water impermeability: ≤ 20 gr
Water impermeability gain: 7 Days
Time to reach final strength: 7 Days
Full drying time: 48 hours
Stand - by time between layers: 3-5 hours depending on ambient conditions
Technical values were obtained in laboratory environment. The performance is valid for 28 days after. Values may vary due to application environment differences. Technical information and recommendations should be evaluated as a guide. Derya Madencilik San. ve Tic. Ltd. Şti. reserves the right to change the above information. Derya Madencilik San. ve Tic. Ltd. Şti. is not responsible for errors that may be caused by incorrect applications.
Color: Grey & White
Consumption: 1 mm. thickness between 0,8 – 1 kg./m² for one layer.
Pot Life: 1 hour
Appearance: A Component: Grey / White Powder B component: White liquid
Mixing Ratio: 10 lt. liquid / 20 kg. Powder
Packing:10 lt. plastic can / 20 kg. Kraft Bag
Shelf Life: 8 months in a dry and cool environment. It should not be left in direct sunlight.
Storage: It can be stored up to 5 pieces in a row in a dry and damp environment with its unopened packaging.